Set for leveling tiles and similar floor coverings. The clamps are reusable. An indispensable kit for those working in the renovation and construction industry. Suitable for horizontal or vertical tiling.
Usage:
Once the glue is applied and the tiles are attached, insert a T-shaped metal shaft (needle) between the tiles.
Then turn the clamp (with the needle already inserted between the plates) 90 degrees so that it crosses the two plates crosswise.
Start tightening the black nut using the wrench provided with the kit. The pressure force may depend on the thickness and type of tiles. But the clamp must be firmly on both tiles, it must not be loose.
Allow the glue to dry and harden, then unscrew the black cap, rotate the shaft 90 degrees and remove the entire clamp.
After you finish leveling and before the glue dries, check that the tiles are level and make any corrections. After cleaning the clips from the glue residue, the set is ready for use again
Technical specifications:
